Lithofin FVE – 1L | Premium Grout & Joint Sealer for Cementitious Grout | Waterproof, Dirt-Resistant & Mold-Proof Finish
Protect your tile grout lines from stains, moisture, and mold with Lithofin FVE 1L – a high-performance, water-based, penetrating grout sealer specifically designed for cement-based grout joints. Unlike topical sealers that form a surface film, Lithofin FVE penetrates deep into the pores of the grout to create an invisible, breathable barrier that repels water, oil, and dirt — without altering appearance or texture.
Ideal for bathrooms, kitchens, showers, floors, and walls, Lithofin FVE is the professional’s choice for long-lasting grout protection in both residential and commercial environments.
✅ Why Choose Lithofin FVE 1L?
✔ Deep-Penetrating Protection – Seals grout from within, resisting water and oil-based stains.
✔ Prevents Mold & Mildew Growth – By reducing moisture absorption, it helps inhibit fungal development in damp areas.
✔ Invisible & Non-Filming – No gloss, no slip risk — grout looks natural and feels unchanged.
✔ Breathable Formula – Allows trapped moisture to escape, preventing blistering and subsurface damage.
✔ Easy to Apply – Simply brush or spray onto grout lines — no special tools or buffing required.
✔ Compatible with All Tile Types – Safe for use with ceramic, porcelain, natural stone, and glass tiles (as long as grout is cement-based).
✔ Eco-Friendly & Low-Odor – Water-based, low-VOC formula suitable for indoor use.
🛠️ Perfect For:
- Cementitious (sand/cement) grout in bathrooms, kitchens & showers
- High-traffic floors and moisture-prone areas
- Post-grouting protection before handover
- Renovations, new builds, and rental properties
- Preventing discoloration and extending time between deep cleans
💡 Note: Not suitable for epoxy grout or ungrouted surfaces. Ensure grout is fully cured (28 days) and clean before application.
🧽 How to Use Lithofin FVE 1L:
-
Clean grout thoroughly with Lithofin KF Intensive Cleaner or MN Builders’ Clean.
-
Ensure surface is completely dry (minimum 24 hours after cleaning).
-
Apply directly to grout lines using a fine brush, sponge, or low-pressure sprayer.
-
Avoid overspray on tile surfaces — wipe immediately if contact occurs.
-
Allow 20–30 minutes penetration, then remove any residue with a dry cloth.
-
Wait 4–6 hours before light use; full cure in 24 hours.
-
Reapply every 3–5 years or as needed for continued protection.
💡 Pro Tip: For extra protection in wet zones (e.g., showers), apply a second coat after the first has dried.
📦 1L Bottle – Ideal for DIY & Small to Medium Projects
- Covers up to 30–60 linear meters (depending on grout width and porosity)
- Also available in larger sizes for contractors and commercial jobs (where offered)
🛒 Seal Your Grout. Stop the Stains. Simplify Cleaning.
👉 Click “Add to Cart” Now – In Stock & Ready to Ship
