Lithofin WAX-OFF

Lithofin WAX-OFF – 1L | Professional Wax & Polish Remover for Natural Stone, Tile & Hard Floors | Deep Strip, No Residue, Surface-Safe

Restore your sealed stone, tile, or hard floors to their original condition with Lithofin WAX-OFF 1L – a powerful yet surface-safe wax, polish, and coating remover designed to completely strip old maintenance layers, topical polishes, liquid waxes, and protective films without damaging sensitive materials.

Ideal for marble, limestone, travertine, granite, ceramic, porcelain, and linoleum, Lithofin WAX-OFF is essential when preparing surfaces for deep cleaning, resealing, or renovation. It effectively removes hazy, yellowed, or peeling coatings that dull appearance and trap dirt — revealing a clean, bare surface ready for impregnation with Lithofin MN Stain-Stop, STAINSTOP >W<, or STAINSTOP PLUS.

✅ Why Choose Lithofin WAX-OFF 1L?

✔ Removes All Topical Coatings – Eliminates wax, spray-buff polishes, liquid polishes, and old maintenance layers.
✔ Safe on Sensitive Stone – Non-acidic, pH-controlled formula won’t etch or damage marble, limestone, sandstone, or travertine.
✔ No Residue Left Behind – Fully rinses away, ensuring optimal adhesion for new sealers.
✔ Prepares for Sealing & Restoration – Critical step before re-impregnating or deep-cleaning neglected floors.
✔ Effective on Multiple Surfaces – Also suitable for linoleum, PVC, and other sealed hard floors.
✔ Low-Odor & Water-Rinseable – Safer and easier to use than solvent-heavy strippers.

🛠️ Perfect For:

• Stripping old wax from stone or tile floors
• Removing hazy, dull, or yellowed polish layers
• Preparing surfaces for resealing after years of maintenance
• Renovating high-traffic areas in homes, hotels, or offices
• Fixing over-polished or film-forming cleaner buildup

💡 Note: Not for use on unsealed porous stone or soft flooring. Always test in an inconspicuous area first.

🧽 How to Use Lithofin WAX-OFF 1L:

1. Pre-clean the surface with Lithofin KF Intensive Cleaner to remove loose dirt.
2. Apply undiluted WAX-OFF evenly with a sponge, mop, or brush.
3. Allow 5–15 minutes dwell time (do not let dry).
4. Agitate with a white pad or soft brush to lift old layers.
5. Rinse thoroughly with clean water or mop with fresh water.
6. Repeat if necessary for heavy buildup.
7. Let dry completely before applying a new sealer.

💡 Pro Tip: Use a wet vacuum or damp mop to remove residue efficiently. Ensure full rinsing — any leftover residue can block sealer penetration.

📦 1L Bottle – Professional Strength, Practical Size

• Covers up to 20–40 m² depending on coating thickness
• Ideal for DIYers, tilers, and floor restorers
• Also available in larger sizes for commercial contractors (where offered)

🛒 Strip It Clean. Start Fresh. Seal Right.

👉 Click “Add to Cart” Now – In Stock & Ready to Ship