Lithofin ASR – 1L | Advanced Efflorescence & Salt Remover for Natural Stone, Tile & Masonry | Fast, Deep-Cleaning Action
Say goodbye to unsightly white haze, salt deposits, and efflorescence with Lithofin ASR (Alkali Salt Remover) 1L – the professional-grade solution specifically formulated to safely and effectively remove calcium carbonate, cementitious salts, and alkaline residues from natural stone, tile, brick, concrete, and masonry surfaces.
Ideal for use after new installations, grouting, or rendering, Lithofin ASR tackles the common but stubborn problem of efflorescence — the white, powdery or crystalline deposits caused by moisture moving through cement-based materials and leaving behind salts on the surface.
Unlike acidic cleaners that risk etching sensitive stone, Lithofin ASR is a pH-controlled, acid-free formula that dissolves and lifts salt deposits without damaging marble, limestone, travertine, or polished finishes.
✅ Why Choose Lithofin ASR 1L?
✔ Removes Efflorescence & Alkali Salts – Eliminates white haze caused by moisture and cement-based substrates.
✔ Safe on Acid-Sensitive Stone – Non-acidic formula protects marble, limestone, sandstone, and travertine from etching or dulling.
✔ Penetrates Deep to Dissolve Residues – Works below the surface to lift salt deposits from pores and grout lines.
✔ No Surface Damage or Discoloration – Preserves the integrity and appearance of delicate materials.
✔ Ideal for Post-Construction Clean-Up – Essential step after tiling, grouting, or rendering before sealing.
✔ Prepares for Sealing – Ensures a clean, contaminant-free surface for optimal adhesion of Lithofin MN Stain-Stop or KF Stain-Stop.
🛠️ Perfect For:
- White salt deposits on stone, tile, or brick after installation
- Hazy films on travertine, limestone, or marble floors/walls
- Cementitious residues in grout and joints
- Restoration of surfaces affected by moisture migration
- Pre-sealing preparation in bathrooms, patios, and facades
🧽 How to Use Lithofin ASR:
- Shake well before use.
-
Apply undiluted to dry, affected areas using a brush, sponge, or low-pressure sprayer.
-
Allow 5–15 minutes dwell time – do not let dry.
-
Agitate lightly with a non-metallic brush to lift deposits.
-
Rinse thoroughly with clean water.
-
Repeat if necessary for heavy deposits.
- Allow surface to dry completely before sealing.
💡 Pro Tip: Always test in an inconspicuous area first. Do not use on unsealed porous surfaces exposed to ongoing moisture without addressing the source.
📦 1L Bottle – Professional Strength, DIY-Friendly Size
- Covers up to 10–20 m² depending on severity of deposits
- Also available in 5L for contractors and large-scale projects
🛒 Eliminate the White Haze – Safely & Permanently
👉 Click “Add to Cart” Now – In Stock & Ready to Ship
