Rockstar Anti-Slip Solution

Description

Rockstar ANTI-SLIP Solution is a specialized, professional-grade chemical treatment designed to dramatically increase the coefficient of friction (grip) on hard mineral floor surfaces when wet. Unlike a surface coating, this treatment is not a film that can flake or peel; instead, it produces a controlled **micro-etch** on the surface that enhances wet traction while leaving the appearance of the floor virtually unchanged.

***NOTE: ANTI-SLIP Solution should only be applied by authorized Rockstar applicators due to its corrosive nature and the specialized process required.***

USES

ANTI-SLIP Solution is used in any area that becomes dangerous and slippery due to the presence of water on the floor. It is ideal for increasing wet grip and reducing slipping hazards on:

• Porcelain Tiles
• Glazed Ceramic Tiles
• Vitrified Tiles
• Polished Granite
• Terrazzo
• Marble
• Showers & Bathrooms
• Pool Surrounds & Saunas
• Commercial Kitchens & Foyers

BENEFITS

• **Dramatically Reduces Slipping:** Significantly increases the grip on wet floor surfaces.
• **Invisible Treatment:** Does not change the appearance of the surface.
• **Permanent Solution:** Not a coating, so it cannot flake, peel, or delaminate.
• **Long-Lasting:** Can last up to 10 years even in high-traffic areas.
• Compatible with subsequent penetrating sealers for long-term protection.

PROPERTIES

Appearance and colour………………………………… Colourless to slightly yellow aqueous liquid
pH …………………………..…………………………… 2 (Corrosive)
Specific Gravity (Water = 1)…………………………… Approx. 1 g/ml
Boiling Point………………………………………………. 100°C
Solubility in Water……………………………………….. Miscible
Flash Point………………………………………………….. Non-flammable

APPLICATION INSTRUCTIONS (Summary for Professional Use)

***Always test on a sample tile to determine the correct dilution ratio and dwell time to achieve the desired slip rating.***

1. Ensure the surface is thoroughly cleaned and free of any grease, dirt, or existing coatings.
2. Wet the floor with water first.
3. Dilute **ANTI-SLIP Solution** with water (typically 1:4 ratio) and apply to the affected area, moving around with a squeegee or doodle bug.
4. Allow the solution to remain on the floor for the predetermined dwell time, ensuring the surface remains wet.
5. Remove excess material with a wet vacuum.
6. Rinse the floor well using **Rockstar NEUTRAL CLEANER**.
7. Once dry, all treated surfaces **must be sealed** with a penetrating sealer such as **Rockstar NATURAL FINISH STONE SEALER** or **GREEN STAR SEALER** to provide long-term stain protection.

COVERAGE

Coverage is dependent on the permeability of the flooring surface, typically ranging from 5–10 Mt² per Litre (approx. 50–100 ft² per Quart) of undiluted product.

CLEANING

Clean all application equipment with water immediately after use.

PRECAUTIONS & SAFETY

**THIS PRODUCT IS CORROSIVE AND CONTAINS FLUORIDE.**
**PROFESSIONAL APPLICATION ONLY.**

**PRECAUTIONS:**

• Avoid contact of **ANTI-SLIP Solution** with aluminum and other metal surfaces (protect them with tape).
• Do not allow to splash or run onto surfaces not being treated.

• Avoid contact with skin and eyes by wearing suitable Personal Protective Equipment (PPE), including protective gloves and eyewear.
• For detailed emergency and health information, refer to the Material Safety Data Sheet (MSDS).