Rockstar Salt Stop

Description

Rockstar SALT STOP is a high-performance, water-based penetrating sealer formulated specifically to combat the destructive effects of salt water, de-icing salts, and efflorescence. Utilizing advanced Silane technology, this sealer penetrates deep into the porous substrate, creating a durable chemical bond that locks out salt and water without forming a film on the surface. This maintains the material's natural appearance and breathability.

USES

SALT STOP is designed for application on any porous mineral substrate that requires robust protection from water and salt ingress. It is essential for protecting against salt attack in areas such as:

• **Saltwater Pool Surrounds** (Coping, Paving)
• Exposed Coastal Paving and Facades
• Infrastructure exposed to de-icing salts (Pavers, Flagstones, Poured Concrete)
• Natural Porous Stone (Sandstone, Travertine)
• Concrete Pavers and Brick Paving
• Porous Tiles and Grout
• Terracotta

BENEFITS

• **Superior Salt Protection:** Dramatically reduces salt water penetration and corrosion.
• **Efflorescence Control:** Prevents the formation of salt bloom and crystal staining.
• **Natural Look:** Does not change the appearance or texture of the surface.
• **Breathable Barrier:** Allows the surface to breathe, preventing peeling or blistering.
• **Eco-Friendly:** Water-based, low VOC ($\text{<15 g/L}$) formulation.
• Permanently bonds to the substrate and is UV, alkali stable, and weather resistant.

PHYSICAL PROPERTIES

Appearance and colour………………………………… Milky white liquid (dries invisible)
Specific gravity……………………………………………. $\text{1.0 g/ml}$ at $\text{20°C}$
pH value……………………………………………………… 7–8 (Neutral)
Solubility in water……………………………………….. Soluble
VOC content………………………………………………… $\text{<15 g/L}$

APPLICATION INSTRUCTIONS (Professional Summary)

***Always test on a sample area to confirm the consumption rate and final appearance.***

1. Ensure the surface is clean, dry, and free of all contaminants. **Crucially, the surface must be salt-free.**
2. Apply generously by low-pressure saturation spray, brush, or roller. The preferred method is the "flood-coat" technique using a sprayer.
3. For horizontal surfaces, apply enough material to keep the surface **glossy wet** for about 10 minutes.
4. If the sealer is absorbed very quickly, apply a second coat immediately (**wet-on-wet**).
5. After 10 minutes, remove any standing or pooled liquid to prevent an uneven appearance.
6. **Curing Time:** Surface water repellency appears once dry. Full cure is achieved in 24–72 hours. Avoid traffic in the first 24 hours.

COVERAGE

The consumption rate depends on the porosity of the substrate. Coverage can be up to $\text{12 Mt}^2/\text{Litre}$ for a single application. Highly porous surfaces will require two coats.

CLEANING & STORAGE

**CLEAN-UP:** Wash all equipment in clean water.

**STORAGE:** Store unused product in tightly closed containers in a cool, dry place. **Do not allow to freeze.**