Lithofin Rust Ex

Lithofin Rust EX – 500ml | Powerful Rust & Iron Stain Remover for Natural Stone, Tile & Concrete | Fast, Targeted Action Without Surface Damage

Eliminate stubborn rust stains, iron discoloration, and metallic marks from natural stone, tile, concrete, and masonry with Lithofin Rust EX 500ml – a highly effective, pH-controlled gel formula specifically designed to dissolve rust without etching or damaging sensitive surfaces.

Ideal for removing stains caused by metal furniture, rebar, nails, water runoff, or drilling, this targeted cleaner is essential for both new installations and restoration projects. Whether you're dealing with orange-brown spots on marble, limestone, or porcelain tiles, Lithofin Rust EX delivers professional results — safely and efficiently.

✅ Why Choose Lithofin Rust EX 500ml?

✔ Removes Tough Rust & Iron Stains – Breaks down oxidized metal residues at the molecular level.
✔ Gel Formula for Precision Application – Clings to vertical and overhead surfaces (e.g., walls, facades) without dripping.
✔ Safe on Acid-Sensitive Stone – Non-aggressive, acid-balanced formula protects marble, limestone, travertine, sandstone, and polished finishes.
✔ No Scrubbing Required – Penetrates deeply to lift stains without abrasive action.
✔ Ideal for Spot Treatment – Perfect for localized rust marks — not an all-over cleaner.
✔ Low-Odor & Water-Based – Safer than traditional muriatic or phosphoric acid rust removers.

🛠️ Perfect For:

• Rust stains from metal furniture, railings, or tools on patios and pool decks
• Iron discoloration from rebar or fixings in concrete or stone
• Waterborne rust marks on bathroom tiles or exterior cladding
• Restoration after construction, drilling, or renovation
• Historic buildings and high-end stone installations

💡 Note: Always test in an inconspicuous area first. Not for use on unsealed porous surfaces with ongoing moisture issues.

🧽 How to Use Lithofin Rust EX 500ml:

1. Clean the area first with Lithofin KF Intensive Cleaner to remove dirt and grease.
2. Apply gel directly onto the rust stain using a brush or spatula — avoid overspray.
3. Allow 15–30 minutes dwell time (do not let dry). For severe stains, cover with plastic film to prevent evaporation.
4. Rinse thoroughly with clean water.
5. Repeat if necessary for deep-set stains.
6. Once dry, reseal with Lithofin MN Stain-Stop or KF Stain-Stop to protect the area.

💡 Pro Tip: For recurring rust, identify and eliminate the moisture source (e.g., corroding metal) to prevent re-staining.

📦 500ml Bottle – Ideal for DIY & Professional Touch-Ups

• Precise nozzle for controlled application
• Enough for multiple spot treatments
• Also available in larger sizes for contractors (where offered)

🛒 Stop Hiding Rust Stains — Remove Them for Good

👉 Click “Add to Cart” Now – In Stock & Ready to Ship