Rockstar Anti-Graffiti

Description

Rockstar ANTI-GRAFFITI is a high-performance, solvent-based penetrating sealer designed to protect porous mineral surfaces against graffiti attacks. This easy-to-apply, non-film-forming formula penetrates deep into the substrate, preventing spray paint, markers, and other graffiti materials from bonding to the surface. It delivers superior, invisible protection without altering the natural appearance or texture of the stone.

USES

ANTI-GRAFFITI is specifically used on NATURAL STONE and masonry surfaces that are prone to vandalism, such as external boundary walls, commercial facades, train stations, schools, and house fences. It is ideal for use on:

• Bluestone
• Travertine
• Sandstone
• Cement Render
• Stone Cladding

BENEFITS

• **Superior Graffiti Protection:** Resists the adhesion of graffiti paint and markers, making surfaces significantly easier to clean.
• **Invisible Finish:** Does not change the surface appearance, retaining the natural look of the substrate.
• **Penetrating Formula:** Provides protection below the surface without creating a visible film.
• **Long-Term Performance:** Recommended reapplication every 3–5 years for maintained protection.
• **Rapid Curing:** Ready to use with no dilution required and cures quickly.
• **UV Stable:** Suitable for all outdoor applications.

GRAFFITI REMOVAL & REAPPLICATION

Graffiti is removed using a high-pressure **hot water** stream in conjunction with **Rockstar MIRACLE CLEAN** (sold separately). Initiate removal as soon as possible as graffiti is harder to remove over time. After the affected area is cleaned and dried, simply **reapply ANTI-GRAFFITI** to the cleaned section to restore the protective barrier.

PROPERTIES

Appearance and colour………………………………… Colourless liquid with petroleum odour
Specific Gravity (Water = 1)…………………………… 0.83 g/ml
Boiling Point………………………………………………. 120 – 200°C
Solubility in Water……………………………………….. Not miscible
Flash Point………………………………………………….. 30°C (Product is Flammable)

APPLICATION INSTRUCTIONS

1. Ensure the surface is clean, dry, and free of any oils and other surface contaminants.
2. Apply **ANTI-GRAFFITI** undiluted using a low-pressure hand sprayer or a lambswool applicator.
3. Allow the first coat to dry for around **1 hour**.
4. Apply a further **two coats**, allowing **1 hour** of drying time between each coat.
5. The product will cure in 12–24 hours depending on atmospheric conditions.

COVERAGE

Coverage is dependent on the porosity of the wall surface and is typically in the range of 5–15 Mt² per Litre (for the total three coats).

CLEANING

Clean all application equipment with mineral turpentine immediately after use.

STORAGE & SAFETY

**STORAGE:** Keep container tightly closed when not in use. Store in a cool, dry place out of reach of children. Keep away from sources of heat, spark, and ignition, as the product is **flammable**.
**SAFETY:** Classified as Hazardous. Avoid contact with skin and eyes by wearing suitable PPE (Breathing mask, Eye wear, and gloves). For detailed information, refer to the Safety Data Sheet (SDS).